As per the last step, it is important you only tighten the screw half way first, then spin the spark wheel a few times before tightening the screw all the way in. This will help grind the flint down slightly before use.
Fill with fuel
The KNNOX lighter takes petrol lighter fuel. DO NOT use butane, propane or pressurised flammable gas to refill.
Please note, our lighter is able to hold large amounts of fluid, therefore you are able to fill with fuel for up to 10 seconds. This video is for demonstration purposes only.
Please note, before you replace your lighter with a new flint, ensure you remove the old flint by tapping the L shape brass piece on a hard surface.
Lastly, per the assembly video, only tighten the screw half way first, then spin the spark wheel a few times before tightening all the way in.
Ways to light
Trim or replace wick
Buffing (brass lighter only)
Please note, the type of buffing pad used in this video is a kitchen scouring pad.
Click here to download our components and assembly instructions.